one eye

Going to go get more steel!!!! Jeff

I thought I was getting paid today, but its a holliday, I wanted to go buy some steel for the rest of the skid plate................ Jeff

Brian how is this coming along? Jeff

You think you'll have it done by the 16th???????? Jeff

Not sure who makes the lights, Greg (Zefy) got them for me up in Canada at Princess Auto a long time ago, like WCSS7 so I dont know much about them............. The rear bumper is going to get about 2" removed off each end, it looks kinda dumb right now.............. Jeff

I have requested friday, saturday and Sunday off but I dont have a 100% yes, best bet is to Just give me a call on your way down and we'll go from there............... Jeff

Just as an FYI I have two extra EA81's one EA82, and a D/R Trans for back ups just in case something goes wrong during this run too, I'll have the shop at my house all cleaned out so if we need to use it, we can swap what we need, its only 10 miles away from my shop to the parking lot at Walker...................... Jeff

Just the one I have on my car............... Jeff

few new pics of progress!!!!!!!!!!!....................................... Jeff

nice!!! Looks good!!!! (2000th Post) Jeff

Just swap one out, its not too hard Jeff

200 if the motor runs, just make sure you dont fall through the floor if you sit in it.................. Jeff

I made a few calls in trying to stir the pot a little to get things going Greg (Zefy) it was good talking to you hope you are able to make it down for this run, it should be a fun.......... Jeff

Its back and Ready to wheel!!! I painted it a little more but other than that its pretty much the same!!!!!!!!! Jeff

Pretty sweet, its almost more of a boat than a subaru!!! Hope to see you up at Walker!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Jeff

I requested those two days off, so I'm just going to make plans for what works with everyone else....................... Jeff

I'll let everyone else set that up as I might be at work.............. Jeff

Map to Walker http://www.mapquest.com/maps?city=Mount+Vernon&state=WA&address=%5B1872-1899%5D+Peter+Burns+Rd&zipcode=98274&country=US&latitude=48.3733&longitude=-122.167355&geocode=BLOCK That was about the best I could do for directions to Walker Valley ORV park, If you look about 200 feet west of the star that is the parking lot. That would be where we can all meet up at and then make our way to a camping spot.................. Jeff

White car is done, ready to be wheeled, I'm buying my old wheeler wagon back so it will be ready in a couple days for wheeling too................ Cars I will have up there Butters White fright and the old wheeler Wagon Jeff

Jeff

Cut new blocks, or you could give the motor mount Idea a try. Jeff

that is your best bet............. Jeff

I would take those bolt out, I know you might have them welded but it will go 100 times easier, that being said you can still do it, I've had a couple that Will welded and it was a pain but still got it. try and loosen up your motor mount bolts on the motor crossmember that way your motor will be able to go up and you can get them that way..... Jeff

you dont want to take your strut out and then try and get it tight up top, you'll have a good one on your hands trying to get the strut back in the knuckle on the bottom side............ Jeff

Take the sway bar out and put your blocks in through the top thats how I do all of mine, its a pain in the a$$ but thats the best way. get it set on jack stands and use the weight of your body to push the strut down, but standing on the hub and knuckle, you can leave all the ball joint and everything in just remove the sway bar and you'll have to strugle through it. Jeff