The Scooby

yes i knew to lock the wheel, and it was strait, but also found the tabs are bad, so i have to flat bed it. and im not 18 so i cant rent the bed, life sucks again...

lol, thats pretty good, but ya we just had a 2inch ball on his rear bumper, not even a reciver, got one tonight though. tire pressure was perfect, right at 35 in subie, and 37 on the drive up dolly. and the dolly was jacked up, the kid i barrowed it from told me that it was in a accident before he got it, he fixed it though, he said the whole frame was pushed towards the passenger side and all he did was try to straiten it and welded it up.

well got everything loaded up and finally left today at about 1.20pm today to head north to bellingham to pick up my $1.00 87GL wagon. head out, finally get there, lock her own to the dally, get paperwork signed and stuff... head out onto the road, well we are using a dam lifted F150, and every time we touch the gas or hit a bump the dam ramps hit the ground, so we say ●●●● it and keep going. well we then jump onto I-5 south, get to speed, car fishtails. ends up if we go a hair over 55mph it starts to sway and BADLY!! so it ends up i had to leave my new baby at a rest stop on the side of I-5 until i can return to pick her up with a flat bed trailer, or get the cash to pay a tow company. so life sucks, paid a dollar for a sweet looking blue 87GL, MINT, ABSOLUTLY MINT blue interior. just needs a little engine work. so if anyone has or knows of a flat bed trayler that i can barrow, or if you could tow my car to my house i would pay you. PLEASE SOMEONE HELP A BROTHER OUT!! Thanks, Shean

well if i get the d/r 5sp tranny in and the lift ill be down with my new wagon im gettin tomarrow, if then ill come with a buddy in his lifted F150 so he can break it in if thats okie? Shean

well i ope to be gettin a 87 wagon, if thats true then i might build up the wagon, or the brat since the brat wouldn't need any more emissions. just swap on all its suspension, engine, and a 5sp d/r tranny.

was thinking today about tha brat i might get, its a 1980 4sp, 4wd. by the way, the reason im stuck on a 1st gen is because they look sweet, and i can get it for pennies on the dollar, running and driving. what i was thinking was a EA81 rearend with suspension, front crossmember off a EA81 car. put in a EA82 hitachi powered engine, with a d/r 5sp tranny. would this work, plus put a 3inch lift on it with some 27's. wouldn't that cover all the problem area's that i would have over lifting the stock 80' brat?

ya it sounds good, i can put on a single cat, so you can pas emissions, then run 2.5inch system back to maybe a glasspack, or the same muffler as me, a Thrush turbo muffler. just have to pick up some mandel bent piping and such to build everything. ill bring my car in and get the measurments and such that you will need.

bored at school... free bump

what do you need run, from the block back, from cat, what? most likly i can do it at my auto shop class if you want, its located in sea-tac. but if it needs to be done "profesionally" then look up a place called sunnydale muffler in burien. i had 3inch dual exhaust ran from the long tube headers to the back bumper for $97. i could do it for probally $50, maybe more depending on with you want. that is if you want to not run cats, otherwise i wouls say to go to sunnydale. Shean

ok im intrested in doing this, i hate having d/r 4X4 tranny, i want the true subaru full time 4wd settup. now i can get a 5sp XT ranny for VERY cheap, but firt how do i know if it is FT4wd? and if i do get it and it is AWD, what do i need to also get to put it into my 86 GL wagon, my wagon is a 5sp car. thanks for any help, i tried search, but really didn't find what i was looking for.

so if i got a full time 4wd tranny out of a XT car, all i would have to also get is the front CV's and get the driveshaft and it would swap into my 86 GL 5sp d/r 4wd wagon?

exactally, up pop the cover, and weld the "spider gears" together.

ya but i want to see them on a EA82 car.

can anyone please help me find some pictures of some 15" alloy pugs. the ones with the black striping on them. i want to get a set for the wagon, and i want to see what they would look like, if i want the 15's, or keep my 13's. or if anyone is intrested in trading me a set of 15's with good tires for my 13 Enkei's and good tires PM me. Thanks, Shean

good old 80's wagon

when it finally loaded, slow school intraweb, the beatiful blue caught my eyes, i love your car, looks absolutly great. and the bull bar looks as if its steel, but maybe powercoated, or almost cromed. absolutly beatiful car!! Shean

i havent and it ends up being like a 4 hour drive from my house, so it looks as if im not gettin it. ill keep you posted though. Shean

ya i understand, im just tryin to save you $300, ya know. Shean

im telling you, its not worth it, its a total waste of cash, go to a boat store and pick up a electric turbine system for around $20, then wire it up a throttle switch. im tellin you, its not worth it. but its your money.

T1

i tried it with a stock turbo off a nissan 300ZX, it get a little more air into the engine at higher speed, BUT its not worth it, it pushes so much air that it actually rattle the oil cap.

i would take a set of pully's, i got power steering, a/c, and everything else.

no not really, ive just always hated it when girls pose with cars and crap like that, if you go someone where to see cars, look at cars, if your out tog et laid, go to a club, or walk down the street, shouldn't go to a car show for that. i guess its because of my grandpa always taking me to the old style rod shows and such.

nice scooby man, i dont like the girls though, if its a car, post a car, if its a girl post a girl, no need to mix the two, they are two seperate catagories.

that thing is a beast... I LOVE IT!!!