Scott in Bellingham

Rollie and I could do it

If you send me an adapter or a pattern I will

i have a bare frame I dont need

if you got a welder just drop the tri-bolt mount and modify the front mt to keep it up high, its stronger and will not get hit and bent,

studying???? Isnt this more important:rolleyes: thanks for the movie good job;)

I consider this thread to be for all us Bellingham guys to help each other , its not a hijack , rootbeer is still welcome

Andy did you get it in?

aftrer one toasted clutch my first trip out I now spin the tires instead of the clutch

my aunte lives there , hey if we get there early enough I wouldnt mine going to some local wheelin spot, also that night it would be fun to see a fireworks display, there will be 2 offroad soobs with us

I built a buggy using a datsun automatic, would do it again, the tire size will determine if you go with the auto or not , dont go to big on a stock soobie auto,a "buggy" will be alot lighter then a "car" so you will be fine

heres my Shedule , July 4th Auburn WA July 5-8 Sandlake Ore drive home on the 8th we will be camping at the dunes , look for my EA82 Blue Bomber car and Mosiahs EA81 wagon, will be taking my wifes black lagecy wagon, one of those days we will run up near tillimook and check out the ORV parks up there, july 5 will be the most people , we have 2 camp spots researved across from each other, stop on by monitoring ch 2 on the CB

thats great to hear

myself will be welding on the side metal on the bomber

Ive got 2" suspension lift on my EA82 blue bomber car its all suspension, used simple 2x2 tubing on top the strut towers and a bent peice of 1-1/2 flatbar on the rear , on Andys car EA81 we have 1" suspension lift on front, got 4" on the strut and 3" on the engine crossmember, so I know you can do 1" , try 1-1/2" nothing to loose except a axle

whats open up at northfork , any of the old trails? , whats the scoop on this area?

go with the double bolt, simpler to install, cheeper bolts, need no reinforcing tube

the engine I would like to make would take the heat generated from a Internal combustion engine and make steam from it and run a secondary steam engine , thus utilizing the energy from the combustion and from the heat given off a steam / desil hybred

ran for a couple months DD 25" street tires , binds and chirps

sounds good bring sawzall blades

you can go 50mm on the front with just some 50mm squ tubing cut 1 peice per bolt, fits on top of strut , need 6 , 40mm is a sinch

ok who wants to trailer my rig so I can go?

any place to camp out around this area

like it . I want one

lets go!!

RTI= Ramp Travel Index