Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

EJ swap who's who

Featured Replies

Did the swap in late 2005

 

Body: 1988 DL

Engine: 1991 2.2, replaced with unspecified 90-94 JDM low miler when the engine got fraked (turns out it was only an idler pully and it now resides in a friends sisters legacy with around 245k on it)

Tranny GL 1.59 low range, standard EA-82 fare.

Susp: Impreza/XT-6 under a PK-Ozified 3 inch lift

Wheels/Tires: 14 inch steelies from an Impreza W/27 inch SSR swampers.

 

 

As a heads up, the offset from the impreza tires with impreza struts is not so yummy with the bottom of the spring pearch. Its an interference fit, and even with it notched and rewelded it rubbed above 75mph on bald SSR's. (so if anyone has a set of impreza coilovers that they want to get rid of cheap, even ebay specials, i'm all ears)

  • 1 month later...
  • Replies 97
  • Views 91.7k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • kingbobdole
    kingbobdole

    Owner: Zem Body: 1984 GLF Coupe Hardtop Engine: 97 Impreza OBS EJ22 Transmission: 97 Impreza OBS AWD 3.9 with VLSD 3.9 rear OBD2 compliant, scannable, super clean emissions. Custom trans mount,

  • Body: 1986 Subaru BRAT   Engine: EJ25D block, EJ22 single port heads, Delta Cams (torque grind), Stainless steel UEL headers, Under drive pully, K&N drop in filter, JDM EJ25D injectors, Forester

  • My car: Engine: '92 Legacy OBD I EJ22e Chassis: '92 Loyale Wagons Tranny: EA82 D/R FT4WD 5spd Other: Mrose Adapter Plate, OBX header, 5-lug swap, RS front brakes, 200SX rear calipers   current p

My latest creation

Body: The Cheese wedge, '89 XT-6

Engine: '03 Legacy 3.0 H6

Trans: 2005 STi 6 speed manual 3.9 fd awd cable

Suspension: Lowered stock XT-6 on KYBs IIRC

Wheels: '05 Legacy GT 17"s

Other: I converted the FailWD to awd due to the number of transmission I broke. Seems the box didn't care for twice the power, kept breaking the diffs. Soon to be supercharged...

null_zpsb97bde5b.jpg

Edited by kingbobdole

  • 1 month later...

Body: '87 GL coupe

Engine: '92 Legacy EJ22T

Trans: '98 Impreza 3.9 5-speed NA

Interior: '05 STi seats

Exterior: RX bodykit, soon to be widebodied

Suspension: Combination of Impreza, XT6, RX and aftermarket

Wheels: Enkei RPF-1s in 17x8, 45mm offselt, 5x100

Tires: Toyo Proxes 4 215/45R17

Other: FWD auto -> 5-speed swap. Before EJ swap, had SPFI motor swap, RX gearbox, RX rear subframe with LSD

Body: '87 GL coupe

Engine: '92 Legacy EJ22T

Trans: '98 Impreza 3.9 5-speed NA

Interior: '05 STi seats

Exterior: RX bodykit, soon to be widebodied

Suspension: Combination of Impreza, XT6, RX and aftermarket

Wheels: Enkei RPF-1s in 17x8, 45mm offselt, 5x100

Tires: Toyo Proxes 4 215/45R17

Other: FWD auto -> 5-speed swap. Before EJ swap, had SPFI motor swap, RX gearbox, RX rear subframe with LSD

 

pics?

Body 92 Loyale sedan

Engine ej22

Transmission Dual range 5sp with Lincoln locked rear end

Suspension 2" SJR body lift

Wheels 14" Pugs with 27" Kuhmo tires

  • 4 weeks later...

I just got done with my EJ22 swap. I love it. I installed 27" tires after the swap. Sitll have plenty of power.

  • 2 weeks later...

Chassis: '85 GL, 5-speed, stock

Engine: stock '99 EJ22 OBD-2. Full custom exhaust: dual 1 7/8" to rear of car w/stock '99 legacy muffler, 2.25" out

Edited by 84GLbenhamj

pics?

 

As its sits right now, there's probably close to 2' of snow on it but here it is before I started tearing into it earlier in the year.

2010840970067339125S600x600Q85.jpg

  • 1 month later...

Body MY86 GL wagon

Engine MY98 EJ22 longblock MY94 intake and wiring

Transmission Dual range 5sp with 3.90 fitted clutch LSD

Suspension 2" SJR body lift/1.5inch subframe spacers

Wheels 15inch pug flat spokes w/ 215/75 wildcat A/T's

 

Misc:

Yakima roof rack

Surco aluminum basket for flood lights, full size spare, and shovel.

Custom front brush gaurd with Hella 500 driving lights

Custom 2X4 square tube rear with D-Rings

MY98 Outback Heated/height adjustable front seats

Subyaddict

 

Chassis: 1983 GL wagon 4wd 307,000 miles

 

Transmission: 1992 loyale 5sp dual-range 4wd (JDM, >35k), with LSD rear diff 3.7 final (from 89 RX).

Flywheel from XT-6, clutch disc from EA82 (new), pressure plate from EA82(new), T.O. bearing from EA82. (had to grind a little on the inside of the bell housing for bigger flywheel)

 

Engine: JDM 1984 GL 1800 from automatic car

(latest and highest cam , and strongest valve springs made stock ever),

revs to 6500rpm smooth, still actually pulls at 5200rpm, intsead of the USDM 4200rpm. advances father than USDM, too. :)

 

Brakes: front from EA82 (vented), rear from turbo with calipers.

 

This car is my baby, it's an 1983 GL that will do 120 mph, NOT JOKING! Don't worry I have new suspension (all bushings), and new brakes.

The 3.7 final drive ratio, and the fast motor, were the keys.

Can you say "sleeper" ?

I've had alot people tell me I should get a new car. :lol:

What, so the cops will see me first? :lol:

 

Sounds like a neat car, but not an EJ-swap...so really doesn't belong here.

  • 1 month later...

Engine EJ22T

Body 91 loyal with cheese

suspension stock (rx front sway bar)

Wheels 1980 toyota truck wheels

Tires 215 60 15 ADVAN AO33's :D

Board Member: angusf

Engine: EJ20 from a '94 Legacy Turbo

Chassis: 1993 BRAT/MV

Tranny: Legacy Turbo five speed

Other: VOS Chip, high pressure inline pump, top mount intercooler

Member: Psychobaru

Engine: EJ22 Carburated

Chassis: 1985 Brat

Trans: 4sp H/L

Other: EJ18 Heads(polished)w/ turned cams

  • 1 month later...
  • 3 weeks later...

i have a dream of fitting an EJ20TT into my '83 brat...am i crazy?

In a word yes, the second turbo won't clear the master cylinder, so you'd have to switch to a single turbo, unless you find a right hand drive brat.

  • 1 month later...

Board Member: Capn_r

Engine: 91 EJ22

Chassis: 1988 GL-10 Wagon

Tranny: 5 speed FT4WD with diff lock

Other: Redrilled hubs, 4x100 with 14x6 VW "imola" alloy wheels and 185 /70/14's

95 Legacy exhaust y pipe with 2.25 tailpipe with a magnaflow muffler

the car has working A/C (Legacy condenser and radiator) and I'm in the process of getting all the car's other whistles and bells functioning. A fun car and having this board to refer to is an incredible asset!

Looks like I can finally add myself to the who's who of EJ swapping!

Board Member: gwilson87

Engine: 92 EJ22

Chassis: 1985 Brat

Tranny: 5 speed, D/r from loyale.

Other: Currently designing a simple 2" lift and ordering the 215/75R15 tires to go on my toyota 4runner wheels. Nothing more than the Y pipe on it right now. will have both cats from the Legacy donor and a straight through muffler for inspection purposes.

  • 3 weeks later...

Body: '79 GL wagon

Engine: '93 Legacy EJ22T

Trans: '88 loyal 3.9 5-speed D/r, p/t

Interior: Nothing but 2 seats and 2 15" Pyle Subs

Exterior: fender flares

Suspension: 4" lift, gl-10 discs all around

Wheels: custom 5x100 adapters to fit 15" Fiero spider wheels

Tires: General grabber A/T

Other: LSD rear, Custom crash bars front & rear, 3000lb winch

  • 2 weeks later...
Body: '79 GL wagon

Engine: '93 Legacy EJ22T

Trans: '88 loyal 3.9 5-speed D/r, p/t

Interior: Nothing but 2 seats and 2 15" Pyle Subs

Exterior: fender flares

Suspension: 4" lift, gl-10 discs all around

Wheels: custom 5x100 adapters to fit 15" Fiero spider wheels

Tires: General grabber A/T

Other: LSD rear, Custom crash bars front & rear, 3000lb winch

 

 

Pics please :slobber:

  • 5 weeks later...

Here's mine: (FINALLY got a new camera)

 

8321_183706119049_559234049_3918943_5077754_n.jpg

 

8321_183706609049_559234049_3918950_4438254_n.jpg

 

8321_183706614049_559234049_3918951_1158549_n.jpg

 

8321_183707079049_559234049_3918956_2315539_n.jpg

 

8321_183707094049_559234049_3918957_6005333_n.jpg

 

8321_183707099049_559234049_3918958_2799690_n.jpg

 

Everything went pretty smoothly, I only had to extend the power steering lines a little to make it fit from the pump to the hard lines in the last pic. All the other PS lines were bent enough out of the way to make them not hit anything. I also had some port and polish work done to the heads.

  • 2 weeks later...

Body: 86 GL wagon

Engine: 97 EJ20R JDM twinturbo

Trans: 92 legacy 4.1 5spd

Other: 6" SJR lift, Megan racing coilovers for 05 forester, Link G4 standalone ecu, turbos running parallel, innovate LC1 wideband, autometer boost gauge,

stage 2 ACT clutch for legacy, wheel adapters 5x100-5x4.5.

 

Parts from 91 legacy ss:

radiator

front control arms-welded together w/stock GL inner portion

steering knuckles

15" wheel front brakes

 

Parts from 89 XT6:

rear brakes

hubs

sway bar

brake master cylinder

 

2 sets of wheels

stock 2000 ranger wheels 15x7 w/33x12.50r15 bridgestone dueler m/ts

JDM 17x7.5 aftermarket w/24565r17 cooper atrs

 

Picture007.jpg

My '92 Loyale now has an EJ22 under the hood. Motor is out of a '92 Legacy wagon with 90K.

picture.php?albumid=41&pictureid=1814

 

More info with lots of pics of the process at this thread.

  • 2 months later...

Forum Name MUGS

 

92 NA EJ22 SOHC OBD1

Chasis 85 GL Wagon (Carbed EA82)

6in BOSS Lift

Trans 5MT D/R

Sachs XT6 Clutch Kit

Welded Rear Diff

235/75/15 Tires

90 Isuzu Tropper Rims Drilled out

EA82 PWR Sterring Rack

Rear Disc Conversion

Custom 2 in exhaust

Custom built this and custom built that...

Modified this and modified that...

To make it all work together...

To get a bad mamma jamma :banana:

 

Heres a thread of the build...and will be continued to be updeated as it progress is completed.

 

http://www.ultimatesubaru.org/forum/showthread.php?t=100861

Edited by Mugs

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.