bajavwnsoobnut

gen 2 wagon wheels and steelys will work but Shawn the alloys except for a few alot of them don't work trust me when I test fitted those gen 3 wagon wheels on they scraped then tryed Edrachs street hakki's with the rally alloys (the one with the small oval holes) they bound up too but still the steel wheels from a gen 2 should work Richie heck you shoulda called me cause I knew the answer and you hafta remember that after that incedent I came over to test fit those wheels you have to make sure they would work with the trailing arm

that's a nice looking red X just lettin you know that the photo link isn't working

Well if it makes it better then it would be a good idea to wait till after the holiday rush or even have it on New Years day even? or eve? have a subaru party perhaps? just throw things into the air for ideas and we'll go from there.

he isn't yet that I know of but I have talked to him a lil bit about it and it is interesting to say the least very interesting sound when the clutch engages at a certain RPM to give him boost and that is the guy I was talking about that runs it in RallyX

ok then well there will be a few of us there so we will let ya know and so does stark street pizza sound good to you guys? I will get in touch with a boardmember that isn't on much anymore that wants to get involved to let him know so I need to know a defanate location for him to meet up with us

didn't know that. might PM me or email me on the particulars?

well a few others will chime in sometime soon about the gen 1 legacy wagon that is running a SC from a mercedes in rallyX and it's tight

ummmm Brian she was there watching me

Ahem, you were not at the last rallyX I ran Photo courtesy of PDXsports.com so who's not allowed to run their OBS?????hmmmm hmmmmmm? :-p Edit: just realized on the photo that was taken right when I grabbed the E-brake handle (this one has DRL's that turn off when the fun handle is pulled) made people wonder what the hell was goin on when the lights would flash

Well if we are sat for the date of the 12th at 3pm we now need a location. So Flying pie, Stark street pizza, Kustom pizza, or anyplace else anyone knows that would be easy access to everyone and somewhat good parking?

congrats man welcome to the OBS side of things lol and hey it's the same color as mine but mine is newer

Find out what year that older subie is and also see if they are holding onto it for a bit so you can report back your findings cause if it's a gen 1 anything there are boardmembers that would be happy to find out about it

http://www.motortrend.com/features/news/112_news041112_subarub9x/index.html this is last months article but just wait for a few weeks and the article that Mtsmiths is talking about will be on their site

Hey Mike are you wanting one of mine? or is that one Hitatchi you have in that box have the fitting you are lookin for?

Mike just get in touch with me cause I might have a few hitatchi's sittin around that you can have the fittings off of in fact if I get to redoing that weber that I have I would give you the fitting on the 83 after I switched carbies but still I might have a few floating around thanks to Andrew for giving me alot of stuff including like 5 or so hitatchi's in various states of dismantlement

no comment from me from my own life lol anyways Ed from what I gather the boots that you can get from the dealership have a better setup for being right over that cat but I might make an extra heat shield for that also but right now I just need to reboot it

k thanks Ed I will keep that in mind for the next time I need a halfshaft but I am just gonna repack it and install a SUBARU CV boot instead of a cheapo crapo piece of junk especialy when it's over the cat

actualy Porsche=Volkswagon=Audi=Lamborgini=Bentley=Bugatti=Seat=Skoda and as for Datsun they still make Datsuns but you don't realize that it is one if you ever see some of those small overcab delivery trucks that have the logo that has a circle and then in the middle says UD that is translated to Utility Datsun so they are still around and owned by Nissan still but don't make what you would think they would make lol

I'm guessing you havn't seen a 96-00 Justy then lol it IS a AWD metro

he isn't Zap and hey Mike if you want to learn how to reboot and rebuild halfshafts come over when I get the supplys to do the pass side inner boot cause of the cheapo boots they used for the rebuilt shaft

same boat as mike that's why I posted

yeah and contact Ed cause he was talking to some people at the last rallyX so hopefuly it will be beneficial to all of us

yeah I just wanted the drivers side seat that is all lol and I am just off of I-205 so it sorta would be a sidetrip but on the way none the less just get in touch with me

Well there is up at timberline lodge on Mt.Hood for one and I don't do anything in snow outside of a car well besides making yellow snow lol and when your through p-town if it's late enough for me to wake up come on by and PM me if you are so I can give you addy and directions if need be and I am sorta right off of I-205

I am agreeing with caboobaru on the craftsman if you can afford it get it in fact I just watched a "american hotrod" episode in which bluebear heated and bent a wrench to do a specific job on a mustang and when he was done he took it back to sears and when they asked he just told them it bent when he used it lol and as for the Bosch I was one of those too but in a bug but the NGK's won't ruin your heads either cause I found out after I sold the car that the bosch plugs I put in stripped the threads cause of electrolitic action so do get NGK's they are also better