Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What Have You Done to your Soobie lately? (Please post in here and keep it going)

Featured Replies

  • Author
I cleaned off the old hunting stickers from the back window and replaced them with more fitting ones. These were before I trimmed the excess off.

 

28671_1457746679716_1114842834_31346454_1092888_n.jpg

 

28621_1456460367559_1114842834_31343413_1746299_n.jpg

 

dude, you can pull the clear off. your supposed to, its just transfer film from paper to window. pull it slowly at a 45* angle.

 

 

 

 

Also, I yanked Leaky McGreasymotor out of the car, tonight I am swapping intake and accessories over. Just a couple more evenings and she will be alive again

  • Replies 7.4k
  • Views 1.2m
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Made a cargo tray mat out of a large door mat from Home Depot.  Its super tough, made of recycled tires, and only $20. http://www.homedepot.com/p/Apache-Mills-Black-60-in-x-36-in-Commercial-Recycled-

  • wood floor

  • While im here Loyale, Id just like to say thanks. Nowhere else on the 'net have i seen a more consistently helpful fellow. Never a bad word or attitude; always just reaching out a helping hand wit

Posted Images

I Made her Legal and brought her home!

 

:( words i wish i could say about Subie.

I upgraded my intercooler

 

from this

 

 

DSC_2487.jpg

 

 

to this

 

 

DSC_29971.jpg

 

it should make a bit more power now that the charge will be cooler

Whats with the plates on the strut towers? Something for Camber adjustment?

This car used to belong to JWX it was built using help from Will and Rankins. Many parts came from a GRM Challenge car including the strut tops and from what I hear (might be wrong) engine. it also has a modified TWE down pipe, big exhaust XT6 bars, coil overs, and revalved shocks.

:( words i wish i could say about Subie.

 

i'd be lying if the first thing i thought of was a car in regards to his statement. LOL!:lol:

 

 

lately i have done:

added dome light.

IMG_0185.jpg

 

2" lift (and in the process replaced ball joints, thats a whole other story...)

(time of pic.. just the rear was done, looked funny as hell. LOL)

IMG00621.jpg

gotta get a post install pic of it all done yet.

 

Made this shiftboot/gate: (cant recall if i posted it yet or not.)

its just out of some acrylic i had in the basement. would like to do it out of aluminum some day.

IMG00608.jpg

 

next up: gotta figure out some larger wheels/tires! and a way to pay for them.

also i have lined up from ReRack in Portland a cheap used set of rain gutter towers to make a roof rack with. $40 plus shippin, cheaper than any used ************ i can find in milwaukee fo sho.

dude, you can pull the clear off. your supposed to, its just transfer film from paper to window. pull it slowly at a 45* angle.

 

I realized that a couple of days ago. :) Never put one on before that so chalk one up for newbness.

I got to change my tire in the Taco Bell Parking lot, cuz my tire finally decided to drop enough pressure make that nasty "flat tire noise".

Gawd, another thing added to the list of crap I have to do to Xandra.

 

Oh well, she's less than 200 miles away from 300k.

She deserves to be high maintenance.

 

Twitch

hahah ouch sorry but thats funny. I changed out my 15inch sub for a different sub cuz the one in the pic started fri'n hah.

post-28666-136027642194_thumb.jpg

I replaced my old rusted out muffler for a almost new junkyard muffler on my Loyale. And I fired up my Legacy after setting for 2 months. I never knew an EJ22 was that loud with no pipes on it. Started first try. Just need to get around to fixing it and getting it on the road.

cleaned up the trunk a little. found Stains

Edited by SubaruJawn

  • Author
I realized that a couple of days ago. :) Never put one on before that so chalk one up for newbness.

 

No prob, I was just lettin you know. In about 3-6 months in the sun, that "clear" film will turn VERY cloudy and sometimes white. :)

Flipped the fuel filter in the engine compartment. Had it on backwards.

 

Located a loose vacuum hose that connected to the top of the carb but I haven't a clue what connected to it. I'm beginning to get irritated with the books I have that have next to nothing on the vacuum system. Even consulted the diagram on the hood and that was about as useful.

waxed the car today.

 

adjusted the rear camber yesterday. the wheels are actually just about straight up and down now. i think one is actually negative camber! :eek::)

 

tried to figure out what is makin the creakin noise in the front when i turn now since i put that lift on. any ideas welcome, i thought the sway bar might have been loose or too tight but that didnt seem to do it :mad:

 

i do have a bad boot on the outer tie rod end which i have to replace but there really isnt any play in the sucker that would lead me to think that was the problem. :/

 

put a cut off hollowed harley sportster muffler on the car for today. gives it a slightly lower tone and makes the pipe go about 12" farther to the rear of the car (previously only went to about halfway back from the axle. ending before the muffler hangers.)

Looks good, same rack I have (Surco)

 

Are you running Forester springs or something? Looks good :)

 

DSC03937.jpg

 

DSC03940.jpg

 

Blu got a top hat :)

waxed the car today.

 

i think one is actually negative camber! :eek::)

 

Woah! Drift Machine!!! :)

I detailed my Brat.

 

When we bomb canned it the wife covered the brat lettering. I felt it was high time to redo them.

 

So, with $2 worth of paint and contact paper I went to work.

 

34794_1480057677477_1114842834_31406691_3640785_n.jpg

 

34794_1480057717478_1114842834_31406692_8315999_n.jpg

 

34794_1480057757479_1114842834_31406693_7891306_n.jpg

 

34794_1480057797480_1114842834_31406694_5443377_n.jpg

 

34794_1480057877482_1114842834_31406696_6328338_n.jpg

Finally got my sorry self back into my Subie the other day due to blown motor (oil pump) and have replaced the brakes, the 30k mile clutch, and finally got to have some "fun" in the car :cool:. Cannot wait to take her off road and enjoy the sites of the good ol' SFV that are still accessible.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.