monstaru

or, you could actually take ************ apart for once.

i suggest instead of jumping around the board asking a bunch of questions that have been answered several times, to search.and read.i bet it would help alot.

better not fix it,that would end your ********************* streak....don't wanna ruin your average...

:grin:this thread is worthless without pics!!!!!!!!!

get ahold of me. i may have some options for you. thanks brian

looks like ************:)go get it dirty.cheers, brian

i miss her....if you sell her i want her back...she looks good....you got my strut pieces?cheers, brian

look sweetheart....when you meet me, you say whatever you want to my face.until then, have some ************ing respect, and drop the name calling. oh, and since high school was like, 2 or 3 yrs ago for you.you get a small reprieve. oh, and you should bevel.its like flossing.just good to do.cheers, brain

your talkin to people that have been wheeling these cars since you were still in junior high ....... and doing your wheels is fine. i had redrilled rims on the front of the brat and 6 lug hubs on the back as a comparison.i ran them both with no issues.and i can tell you the amount of beer i had when drilling those front rims was not conducive to straight holes.....and even after a botched bevel job....it never shook, shimmied , or shantied ....more experience helps when giving advice . i beat the ************ out of that brat and never had an issue with either. if you can afford to do your hubs, sure , you get more options.but seeing as how you did not drill your own hubs, i would say that your opinion goes into the "well, i could pay for it , so i did it " column. might wanna think about giving advice on things you actually know about. cheers, brain

i can count myself in ......SPOKANE , warshington, also known as spocaine, spo-vegas, spoka-loo, etc.....the town of masde up names ***************es!..........cheers, brain

well there's your problem.......don't buy things that suck:grin:cheers, brian

i'm comin, i hope i have a car to wheel!i may have to borrow one jeff!

the bevels center themselves........

yes.....and ...no...but it is pretty straightforward.take a hub and knockout two opposing studs.mount your hub to the wheel.mark your empty holes on the wheel by using a transfer punch to relocate the holes to the wheels. it helps if you put the hub on the face side of the wheel ,instead of its usual orientation. drill to whatever size the other holes on the wheel are.the bevel is done with a beveling bit it is not that difficult, a large half inch drill can be used just as easy as a drillpress.of course that will probably not be wise if you are not used to utilizing torquey tools...... slow and steady wins the race.use some tapping and drilling fluid. cheers, brain

gorilla tape>uberoo's mouth..............

ok, bent and notched SOME tube this weekend.nto as much as i would have liked though...... some concept pics....these pieces will be fitted and mounted....but the pics are from planning stages.... cheers, brian

.01 difference in gearing is a common thing that happened on a lot of factory vehicles.no need for different sized tires with that little of a difference scott...cheers, brian

correct, regardless....FOA has a good offering in that design. you can get it n a 12"..and that is on the cheaper end of things relative to size..... i have read good things about them.and you cannot beat the price in comparison to the competitors...... cheers,brain

word on the street is that 10% is an ok difference. so, 1% is definitely ok...... there are several posts about it at NW-WHEELERS...........thats where i get almost all of my hardcore info:grin:, and pirate4x4 of course. but there are a couple of guys running more than 1%..........and say that it is fine.... cheers, brian

technically, i do not think that is a strut ......pretty sure it is a coilover shock,with a secondary dampening shock... you can get air shocks that are coilovers to do both jobs for you. and regardless, you will not be able to use the travel they have to the fullest extent.you will be limited to the travel your axles can take...... but cool is cool.....car looks awesome.i love the clutch.cheers, brian

GET SOME!damn you ugly.........:grin:cheers, brian

triple BOO!!!!!!!!!!!!!!!

if you want to feel welcome, it would behoove you to go back and re-iterate your statement.cheers, brian

eulogy, didn't call you gay.....i called you a nutswinger. i been around here for years,and about 5 of the mods are good friends.. you have no idea how much of an rump roast i can be.this is not representative of it at all. come to the show this year and you might get an idea .....or,i am on chat about every night.come on in.lets chat. true to blue, i am sorry for all this ************ in your post.clean car. everything stated was off of your comment .i have no interest in 3rd gen cars.so i did not read it......put some dents in it, it will make you feel better. cheers, brian

there is usually a couple of kids around.cheers, brian