February 25, 201115 yr Zap Ive been waiting for you to make a thread of this but you havnt yet, so here I go, not tryin to push you out of the way I just like these kinds of threads. So here goes lets see your lifted Soob, Just like all the other years dont go overboard with the pics one to three will work, not fifty, tell us what it is and just a little overhead on it................... I'll kick things off..... 8" JAW Lift 31X10.50X15 TSL Super Swapers six lug EA81 Straight Piped Custom cheap homemade bumpers fun Jeff Edited May 18, 201114 yr by Turbone
February 26, 201115 yr Love these threads and FINALLY get to post in one!!! 1998 Outback Limited 5mt Highguys 3 inch lift with Forester struts & springs 215/70/16 Grabbers Custom bumper
February 26, 201115 yr Current Soobs with lifts 82 Brat. ea81 engine, 5 speed D/R, sammy t-case w/ rear driveline disconnect. toyota solid axles, TJ Coils, toyota IFS/Subaru power steering. 4 link rear, 3 link front. 36" TSL SX tires on 17x9 steels. 17 gal. fuel cell. 86 Brat. 3" BYB/Ozified lift, Genuine Subaru 14" alloys., rear disks... for sale this spring.... Mountain Grizzly. 4" BYB/Ozified Lift. weber 32/36, rear discs, welded rear diff, ea82 rear coilovers. lots o' stuff. 27x9.50x15 Swamper SSRs on redrilled 15x7 wagon wheels.
February 26, 201115 yr Here's mine finally 85 GL 5-speed 2" JAW Lift 27x8.5x14 Maxxis Bighorns on 14x7 Les Schwab Steel Rims, drilled. Edited March 21, 201115 yr by Vegablade
February 26, 201115 yr '92 Loyale 3AT 4WD: 2" SJR Lift 27" Bighorns Roof rack and offroad goodies! '95 Outback 4EAT AWD. Outback KYBs Forester Springs First gen GT wheels
February 26, 201115 yr 1988 Subaru DL (Guido) 2inch Boss Lift 27 x 8 x 14 Old School BF Mud Terrains Muffler Delete:lol: Currently in intensive care waiting for a resurection. Before the Rust Proofing AKA Cow Paintjob.
February 26, 201115 yr 1990 Loyale manual locks,windows,mirrors, no AC, no tilt wheel (perfect for a wheeler, less to go wrong!) 6" homebuilt lift subframed (with carrier bearing mounted to it) homebuilt bumpers (with engine guards and fuel tank sliders too, connected to subframe F/R) sleeved extended radius rods boxed/gusseted control arms welded diff rear disc brakes WRX buckets CD/CB/PA/KC's ej22 exhaust routed OVER driveline and rear X-member D/R tranny 29" swampers New for 2011: homebuilt roofrack with shovel/jack/spare mounts RX front springs (cut) Accord (front) springs in the rear The springs added roughly another 2"-3" inches of lift
February 26, 201115 yr 1997 Legacy Outback,4" home made lift, stock rims, good year wrangler a/t tires. curtis
February 27, 201115 yr 1994 Loyale 2" lift (front is body, rear is suspension) roof basket 6-lug (with Toyota studs) General Grabber AT2
February 27, 201115 yr Here we go........... 1991 Loyale 9" BJ LIFT! EJ22 Rear Disc brakes homemade custom rear bumper (Front soon) Warn winch for now 235/75 15s (soon to have 31's ) Custom Front brake set up 15 inch Pugs Custom Exhaust ( tucked up) Sorry no wheeling shots yet........ hopefully soon [/img] [/img] Edited February 27, 201115 yr by 88Subi4x4
March 1, 201115 yr '88 GL Hatch 6" SJR Lift 15" Drilled Chevy Wheels 33" Mud Terrains EJ swapped in, but not wired up yet. *Update* EJ swap finished! Edited March 23, 201115 yr by Big Country
March 2, 201115 yr 04 Forester struts/WRX springs. Going to get meaty off-road tires eventually, and my new "off-road" bumper Still no tires yet though, so it will get higher: Edited March 12, 201115 yr by Kostamojen
March 5, 201115 yr Just got the wheels and tires mounted up today. Still have a bit more bashing to do up front, but otherwise my experiments in compression have shown rubbing only when turned all the way and stuffed 4" SJR lift, 235/75/R15 on 4 lug Diamond Racing Wheels (~59bucks a piece) (The thing on top is a lumber rack for work) Edited May 18, 201114 yr by Turbone
March 7, 201115 yr [/img] 83 coupe 3/4 inch SJR lift 3.9 LSD 5spd d/r rear disk brakes 15x6 superlites with 27x9.5 TSLs and a few other little goodies.
March 16, 201115 yr Got my new tires today I had to remove the front fender liners, cut the front bumper a little more, and pound in the front of the rear tire well just a little to get them to fit. They don't rub at all right now, but I would like SOME kind of front fender liner in there... Little comparo I put together, doesn't show much very well though: More pics: Edited April 13, 201114 yr by Kostamojen
March 18, 201115 yr 95' legacy with 98' ourback struts with 28x 8.50 r 14 super swampers and some 205 70 r15 snow tires, some rear pinch weld mods, slight fender trim. also entire front core support has 1/4 inch plate steel for bumper mount and rear diff welded. hoping to get another three inches of lift soon and 31's. Edited March 21, 201115 yr by subimonster
April 4, 201114 yr My GL is newly lifted/leveled. Just have the skidplate left to do. Front lift, rear cranked up a bit.
April 8, 201114 yr [/img]92 Loyale EA82 bone stock Allied lift 4" fr 3" rr Allied wheels w/ Kumho AT 235/75/15 Cutting and shaving on both ends. Still rubs in rear little Just finished lifting, now needs to get dirty
April 11, 201114 yr 86 BRAT 6" Lift (Bill Omlin) Weber Carb Redrilled yota wheels 225/75/r15 tires Welded rear diff Pre 86 jump seats installed w/ custom mounts (removable too) 5 speed dr Separate hi/lo 4wd shifters Simple front and rear bumpers Soon to come Custom exhaust with wrap around headers to increase clearance roll bar better bumpers w/ winch lights! And maybe the high powered ea81 that was build by Qman, installed in "The Beast" and is now in the garage with cracked head. Big thanks to Bill for his expertise, great work, and all his help! -Andy
April 15, 201114 yr 91 loyale pushbutton 4wd 235/75/15 on redrilled yota's 2" homemade lift midwest rust load bearing bumper stickers
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now