comatosellama

http://www.angelfire.com/crazy/bushy5552/weber22.html Found this as well. I guess It's newas I had previously searched forever.

And to Jezek; With all of your knowledge and passion for subarus I feel like you would be a great person to restart subaru in your beautiful country of Honduras

Is that a V12 in the backround?

Would my non really hooked up exhaust cause it not to run as well? Oh how I wish, lol

I set the distributor cap where it was before, should I do the full timing light with the flywheel thing? I'm thinking also recheck all vacuum places, reseal my egr block off plate (found a bag of new gaskets). Also my vacuum canister isn't really hooked up at all, haven't had any luck finding an ea81 guide as far as that. This weber swap became much too complicated :/

New bulbs in the tailights. New throttle cable, ignition coil. Still won't start. Gonna get the exhaust done up tomorrow, see if that'll do it for me. Probably gonna do wires as well, the spark is still a dark amber after the coil. All I get is backfires

Check the bottom left. That website changes the name to the file "type" it is, music, install, ect.

I can make the subframe spacers and weld all that well, but I'd like to get the strut toppers done for me, seems the only part where crap welds would cause catastrophic danger.

This is making me lean towards just buying the hubs and wheel bearings and doing them. The entire assembly is apparently from a junked 95 legacy, so even if they're not the cause I feel like they will be in a short while. I just can't get those 13 mm bolts off.

https://i.imgur.com/TTzpsLT.png The windows one came up with this, I tested the linux ones in crouton and it was fine, but windows appears to be bugged

Took it in to get a hard line replaced. Next up is exhaust on the brat.

I guess I'm just spoiled when it comes to shipping because there's a place in town that can deliver pretty much any import parts to you within hours

Would temp measurement not be diluted by brake heat? Not meaning to doubt, just understand

I get a pretty noticeable whirring noise from the rear of my car, trying to figure out if it's wheel bearings, crap tires, or just 20 year old subaru noises. What should I be looking for? Gas mileage is bad, but that's probably because I have to redline to stay with other cars

Rock auto's shipping is it's killer for me

This is the original site, now defunct http://developer.berlios.de/projects/freessm

I haven't found a free version without a trojan, been looking for a while. You could set it up in a virtual machine possibly. There seems there was a good download, but the site has been taken down it would appear

Outback struts + some llama brand trailing arm spacers

Do you do 95 impreza lifts? Looking for the strut bits, possibly the whole shebang. Just not confident enough to make my own strut toppers.

Start a crowdfunding thing, I'd definitely throw like $20+ to get this happening, and I'm sure there's many more that would as well. And yeah, site was down earlier

Correct, but at the beginning of the installation, you have an option to do the custom/advanced install, which lets you choose if you want adware and some other BS.

Finally closure

Jeremy's toybota gave me an idea... Take a old gen fwd/4wd subaru, replace the rear diff with a bearing carrier for the driveshaft, and then affix a propeller to the driveshaft behind the car.. Just a funny thought, not planning on it anytime soon

Arb makes a air locker for the r180. $1200 US dollars though. Would rather have a wagon

Seems like a "free time" business, or they're off rallying