The Scooby

me a few days back driving around in my wife's outback, ill have to get one of me tonight with my 70's stash

got one off a hatch at work $125 for it, let me know. well just give us a call, 206-243-4665

how far is reiter pit form seattle? i want to get out in my wagon, since i built it i have yet to see what it can really do, one small thing by my house but it takes less then 2 minutes to make it through. is there anything closer to the sea-tac, burien, kent, des moines, auburn area?

sorry but i dont get it, what does it do?

yes, but tires machines at the local stores will not be able to do so, the valley of the rims are not deep enough to grab with most tire machines.

the alt will only put out max volts above 2K rpms, so bring it up to about 2200rpms and check it again, should show 14.4 if its good.

ya i made it myself, im not done yet, i will eventyally cap the ends of the square tube for more strength, as well as run more round tubing around the corner of the turn signals and such for more protection as well as being able to know where the corners are on the trails. very very true, i can't wait to swap in a carbed 2.2

took me about 2 hours to do the lift start to finish by myself. hardest part was the front, the rear took maybe 5 minutes, didn't even have to pull off the wheels. here is my wagon.

thanks it was alot of fun

i was looking for the same thing, i ended up going with a SJR 2inch suspension lift, 15inch alloy peugeot wheels, and some 215/75/15 wild cat tires. so far i can get everywhere i want to go, now its not a hard core wheeler, but it is alot of fun to go on logging roads, get to hunting/camping sites, and tredge around in 1ft deep snow with no problems.

i tore mine off against a tree on the drivers side, and today ripped off the passenger against a fence while sliding around in the snow. great lookin wagon, and i dont know what it is but i love the look of a subaru wagon with a roof basket, i can't wait to get mine.

hey scott, is that the one you where talking about me helping with? if so sure, but it will have to be after the 1st of the year for me, well after the 5th, my parents flew down to southern california this morning to help my grandma, my grandpa had a heart attack yesterday and is not good. anyways ill let you know when they get back and when i can come by.

3dr, hatch, turbo brat, huh huh? mine, need to take my dam digital camera with me, keep forgetting it when im yanking people out of ditches and snow banks. i figured out how to ghost myself into the picture while its taking the picture with my new nikon D60. then me playing with my wife's outback in some snow by my house.

easy way to get water out of a cylinder. pull the plugs and fill the cylinder with rubbing alcohol, it will stay at the bottom and push up the water, then it will evaporate and your good to go.

i have all the parts you need in stock and can ship them as well, when the weather gets better that is, i have yet to make it to work in a week because of the snow/icy roads. once it clears i can send them out. maybe tomorrow, but with it dumping snow right now with the 5+inches on the ground i doubt i will be able to get in within the next few days.

more air

so where is walker? im by sea-tac air port how long of a drive is it from there? i might have my wagon up and running for the first time since august so i hope to make it, but it depends on how far away it is.

i knew i saw a new lifted brat in the burien area, i was up eating at my favorite food joint and saw you cruse over to schucks. looks great, now i just need to get my new engine installed in my 86 wagon so i can go wheelin.

ya, ive wanted a lifted EA82 wagon for YEARS now since highschool, i finally have one so ill just toss a new engine in it, got one to run tonight, tossed in a fuel link and hooked the jump box to it and she fired right off, 89 SPFI, so ill just put that in my wagon, carbed with my freshly rebuilt weber i have sittin in my wagon.

SJR 2inch suspension EA82 5sp D/R Welded rear 15inch alloy pugs 215/75/15 wildcat tires yakima rack, making custom basket Custom front/rear bumpers just have to find a good running EA82 to stuff into it so i can drive the dam thing again, its been since august since i drove it last

no computer upgrades other then a torque chip. intakes make you lose torque, you can do a custom cat-back but that costs $$. take a cut off wheel to your air box and snorkus. do a tune up (including fuel filter and PCV) and enjoy until you get money.

LMAO that is good, i forgot about that picture, i think mine is worse lol. again had a awsome time hanging out with everyone!!

ya im sorting through mine now, got some good ones, and some others got of my car. had a AWSOME time, and thanks again to everyone i got to meet and hang out with. ^me in the background he he he