GLCraig

Umm...????

It's a panasonic, the Hitachi is a bit bigger.

The deadline is being extended. If you have some designs, please clean them up and get them in.

This appears to be an attempt by Eric to get Ken motivated in to doing something with the brat.

The top picture shows an aftermarket strut and the lower picture shows a OEM strut. On the OEM strut, the studs will be above the lower spring seat.

The Subaru tools are not required but they are nice to have when installing those seals. If you can borrow them from someone do it, but you probably wouldn't want to go buy them.

Hey let me know the next time you guys head up Goat. I've been up South Fork several times over the last 30 years but I haven't been up goat yet.

Yes, the Astoria will be more like Hoodriver than Thruston ORV

I'm there for sure :banana: Oh, this year I'm bringing the GL

You're slacking Austin!!! Someone like you should have gotten' a 4-door Justy

It was shooting some blue smoke at the last rallyX

It's not an EA81 carb; those all had electric choke and fuel cut solenoid. It dose not have the stud for the air cleaner cover hold-down. It dose not have the right throttle linkage either. It's probably not a 78/79 EA71 either. IIRC those had electric choke too.

Kumho sells a rally tire that's a 165/80/13 http://www.kumhotyre.co.uk/Motorsports/KH_brochure03.html

I thought you had to be shorter than 5'8" to drive a 360?

I got a voice mail and an email from Kim, saying that the event has been cancled.

I'll burn a CD and bring it with me to this weekend's rallyX

then how is this weekend's PRG rallyX the last of the 2007 when PRG has on planned for November?

Did the PRG cancel the november RallyX? http://www.pacificrallygroup.com/rallyx.html

Some of the aftermarket suppliers are trying to get away with selling 1 y-pipe that they believe will cover all of the EA81 model years. Because of the different ASV combinations found with the EA81s there are going to be different Y-pipes to match those combinations. A y-pipe for an 81 will be different than a Y-pipe for an 82 and 83+ later will also be different than both 81 and 82.

Bpr6es-11

No

Possibly, the seller had some of the non-vented, drilled and slotted EA81 rotors for around $30 each IIRC. I think they had some EA82 rotors too. There were only 3 rotors available so I jumped on the two I got. Also I bet the price was a type-O.

:banana: Sometimes a case of Insomia pays off. If I have enough time tomarrow after work I'll be putting them on the car.

I bought some from the Carquest on Mollala Ave, a couple of weeks ago. Also MT. Tech on 7th street should have some on their shelf.

It's at the Straddleline ORV Park, located west of Olympia WA. http://www.co.grays-harbor.wa.us/info/ORV/index.asp