Qman

Once again we will be doing the annual Xmas tree run. The past years have been a ball. Snowy roads, meet and greet, Fire, camp stove and water for coffee or hot chocolate. BYO food and beverages. Tree permits required to harvest a tree. $10.00 purchased from the DNR. Be sure to bring a saw to cut down your tree with. 12-6-09 Meet at McDonalds in Enumclaw around 9AM Leave @ 9:30am for Greenwater. Get trees and hang out and leave at your leisure. I will be leaving by 3:00pm for home. I will have pop-ups and firewood. Please bring your own chairs, food and beverages and be eager to have a fun day. Attendees Qman +5 xoomer The Beast I Drive one eye Turbone +2 subaruguru edrach Zap +3 michael appel _1337_crayola_ Kyle691 The Scooby oppinheimer Breeke SubbieDaddy80 Delta crew +6 Rooinator Scoobywagon jbbvw eulogious Scooby17 scoobyclimbs dughrt

Welcome aboard!

Yes, congratulations are in order for Mr. Mager. First stage rally win. First overall 1st. And ran 12 miles of the mountain stages with out brakes after blowing a rear caliper. I spoke with Mark on Monday and he was still very excited about it. Very cool when one of our own makes it!! Great job Mark!

Sorry about that. I'll talk to the other guys and see what happened. They may have confused our website with the specials we have been running.

Did you mention you were from the USMB?

For future reference, Delta Camshaft sells new HLA's for under $9ea. Call if you have bad ones. Generally, you will see one or two go bad. Never a complete side though.

You are right, expanding foam is not a structural fix. That area is structural and important. You will need to repair it properly or part it.

GD, you know the rules of engagement... DanMac, your new here, the rules of engagement(debate) attack the idea not the person. Everyone else, I blame you more than both of them. I have editted the stupid out of this thread. If your post isn't here anymore then you should now know.

People, quit... first, bad mouthing a mechanic before you find out the true problem is plain stupid! A part failure is not his fault. If he did install it wrong then it is. When did you get your crystal balls back from the shop? The "guesses" are just that. Do not discount anyone's "opinion" as there is not enough information to do so. Some of you are getting way too big for your britches!

Cool trinket though. It was celebrating 30 yrs in America. (1997)

Those are still available new/ I have one that has never been on a car. Although you will be about 10yrs behind the times, lol.

1. Qman, EA81 (2X), ER27 (2X), EJ25 (2X) plus several Chevrolet cams through the years.

Crater Lake is indeed beautiful. But everything around it is desolate.

Gary, follow my write-up and you will be fine. PB or Yield advice is good. DO NOT USE a 5/16 or 8mm socket. Everyone I have seen done this way only works 1/2 the time. Then you get to cut off the stub and bolt head to remove it. The best way to break the stub bolts loose is with an impact driver(the hammer type). This breaks any rust loose and loosens the bolt at the same time. Most tool trucks have the socket on-board. If not, they can have it drop shipped tp your door. The time required depends solely on your abilities and tools. If you don't have the right tools it will take longer. It should only take an hour or so to do though.

They won't show because your acct is set to private. Can't see the album either.

Engine to body grounding bracket for an EA71 or EA81. I believe the 12 guage wire from the battery cable goes there.

I have been to it. It is a nice smaller meet. My brother will be there showing his wares and fab abilities. Quale "T" automotive.

Really... How do you feel about the fact that your brakes were manufactured by the Mitsu corp?

RH drive makes it Australia or New Zealand. He looks to be competing in some sort of Gymkahana. Looks like a decent fab job though.

I did a similar thing with an 86 turbo sedan. Unfortunately, he found video games and girls and decided he had other things to do. We did get him through high school. He is 18 now. But that too was a struggle. Don't get me wrong. He is a good kid. Other parents nor the police have ever called complaining about my kids. When he applies himself he is capable of achieving anything he wants. I am not saying that it will not work to help him stay focused and motivated. Just don't put all your efforts into one approach. You may need a secondary plan. The best thiing you can do for a child living in a split environment is to stay involved in his life. Try to work together with his Mother in keeping the same values and rules. And just simply be there for him. Good luck, and I wish you great success.

Very nice. I am jealous, mine sits in pieces right now. Just picked up a front axle and will get the ARB swapped from the Brat and get it back on the road.

Congrats Dave, I hope everyone is doing well. Give the Missus a hug and tell her she did a good job. He's beautiful!

These guys have been around for a while. They give decals for 100, 200, 300,000 miles passed on original running gear. Congratulations on 10 yrs!!!

The flywheel tool is for locking the flywheel in place when doing any engine work. It will hold the crank in place when doing timing belts. It will aid you in several other tasks as well. The main thing is to use it when doing in car services. Out of the car there are several different methods available.