Search the Community
Showing results for tags 'Subaru'.
-
Hello! I am in a situation where I received a mint condition Subaru Forester 2007, no turbo, ej25. The only issue with this car is the fact that it had a front accident which busted an engine cylinder, I am looking to replace the engine as a whole and am looking at local pull-a-part's to buy the engine. My question is if anyone more knowledgeable about Subaru's can suggest which Subaru engines will be compatible with this model (apart from obviously finding the same model). From my research, I've heard there are certain Impreza and Outback models that have the engine, but I am not entirely sure so I thought I'd ask. Any help is appreciated! Thank you. -
When driving my Subaru outback 2002 the green power light will start flashing uncontrollably and does not stop. It comes on occasionally and goes away after turning the car off and on again. I topped up the transmission fluid after realizing that it was low. I have been experiencing loss of power at times and other times the car runs great seemed to run great after I topped up the fluid and thought that was the issue. Today the light came back on again on the highway. I have also been feeling some clunking while pressing the gas peddle and releasing the gas pedal. Which I don't recall being present when I first purchased the car around 2 months ago, after I topped up the fluid that seemed to help the clunky gas pedal a fair bit but occasionally it still occurs. I've noticed the steering becoming harder at times but most of the time it seems fine. I thought maybe a failing power steering pump or something like that or maybe that's an entirely different issue. Could the power light have something to do with power steering? or does it strictly refer to the transmission? The car has 170,000 km. Not a lot of info online about the blinking power light. Any info appreciated, Thanks. -
Sometimes I can be a scatter brain ... not thinking about it I just washed the undercarriage of my car almost immediately after getting a protective undercoat applied to my new Subaru . Did I just waste $600... ;(
-
I have a bent valve in an 85 Brat A/T. I want to replace it but I can't find any place that specifically has the Large valve. Rock Auto says it has it but i looked and the 82 Brat in their catalog uses the same valve part number. And correct me if I'm wrong but pre 84 had smaller valves... I just don't want to buy it pull the head and find out its the wrong one.
-
Just thought i would share this awesome thing. A guy on ebay is selling an ea81/ea82 to ej22 swap with all the parts on ebay. Low mile engine. If I had the money and it wasn't 8 hours away, I'd be picking it up More than likely the seller is on this website too. https://www.ebay.com/itm/Complete-Subaru-EJ22-engine-with-EA81-EA82-conversion-setup-/202151761344 -
I have an 85 brat that I bought a gasket kit for. When I replace the head gaskets I accidentally adjusted one of the valves. Total stupidity on my part but nothing I can do about it now. I tried to fix it by using the adjustments . 01 for the intake and .014 for the exhaust. I didn't realize at the time that mine wasn't the solid lifters but the hydraulic ones. I know now they're the hydraulic ones because they have the little locks for the nuts. Now that the engine is back together and ready to start it runs terribly and ticks. I haven't ran it more than 30 seconds because I figured what I did. So my question is what do I adjust the valves to for the hydraulic ones?
-
I have an 85 Brat that's a 3AT that I've almost finished putting back together after head gasket replacement. I got a new radiator off of Rock Auto. My question is is there a difference between the radiator in Auto and manual or are they the same. It looks like my OEM one except the radiator cap hole is bigger and the inside of the reservoir looks different. I'm making sure it still works as the auto trans cooler. I have pics if needed. Link to radiator: https://www.rockauto.com/en/catalog/subaru,1985,brat,1.8l+h4,1267747,cooling+system,radiator,2172
-
My oil pump shattered and it's stuck in the engine. Here's the back story: I was replacing the oil pump in my 85 Brat when, while removing the old one from the engine, I turn around for a second and my dumb friend decides to use a mallet to get it out. The oil pumps are know to shatter and naturally it did. Unfortunately the worse case scenario came true and part of it is stuck in the engine still. It will spin but refuses to come out. I've tried everything. I even drilled a screw in it so I had something to pull. Any suggestions?? Pics attached https://ibb.co/foXbjx https://ibb.co/hbnnrc https://ibb.co/dMoABc https://ibb.co/mPqe4x
-
I have an 85 Brat with the 3AT. I also have an 89 GL parts car with a 5 speed D/R. I want to put the 5 speed into the brat but, I have to get rid of the GL by this weekend, so i wanna pull the transmission and other stuff I need. My question is what do I need to pull from the car for the swap? If the list is somewhere on here just post the link. If not please help!
-
Hi! A few years ago my car was running even though it was off. I thought we took out the abs fuse but maybe I was wrong? Where the fuse was it was H/L Relay LH. Right when we took it out my ABS light was on? It has been so many years, we tried to find a replacement but couldn't find it. Am I going insane? Does a 95 have an abs fuse? I just wanna fix the light for my brother. I look online and it says its a head light fuse but all of my headlights work and in great shape, I'm so lost. Update I just found out my brother showed me the fuse box upside down over face time. IM looking for SBF no 7 fuse. Would that cause for abs like turning on? This is not the exact picture of my fuse box but its this on in the photo except I am missing SBF 7 and 6 http://allauto.biz/wp-content/uploads/mods/subaru-forester-2.0-mt--1993-26514-5.jpg -
I may need to replace my clutch plate soon. The clutch would disengage barely enough with the clutch pedal to the floor. I adjusted the clutch cable so it is now possible to press the clutch pedal to he floor put the transmission into reverse without hearing the clashing of gears, but... accelerating with the clutch fully engaged, it looks like the clutch slips. The RPM rise at full throttle without the expected corresponding acceleration. I last did this job on a Gen 2 Subaru in 1989! I think I can do it again. Please, I would like advice on... Where to buy parts, including the insert to position the clutch plate What other jobs should I do on the engine, as it will be out of the car, and easy to work on? mkoch -
85 EA81 Brat New Weber Carb New fuel pump Both New fuel filters New ignition coil New battery Brand new Distributor New sparkplugs gapped at .44 New spark plug wires. (Correctly ordered on the cap) New Distributor cap and rotor New PCV valve Timing is correct (checked nine times) New exhaust Did a compression test and it was good. Don't remember the numbers though Still won't start. I don't know why. Any advice or help?
-
Hello everyone! This 78 Brat came to me a few years ago and I have slowly been getting it back on the road. Here is the story behind my new car. Sometime in 2013 my grandma was willed this car from a cousin of hers. It was bought off of the showroom floor in Denver Colorado in 1977. She drove it every day until she bought her 92 Legacy and garaged the Brat. My grandma gave the Brat to my cousin and he put about $400 into it to try and get it running. He had the carb rebuilt, new water pump, new alternator, new fuel pump. He couldn't get it running right so he sold it to me for the $400 he had into it. I put a clutch in and drove it for about two weeks when the head gaskets blew. My dad called an old friend in Brook Forest near Evergreen CO who has a ton of Subarus and parts looking for a new engine. Turns out that Bob had an EA71 he was willing to part with so we drove up there and got the engine. The good news is that the engine only cost the fuel it took to drive up there and get it. The bad new is that the engine was the wrong EA71. I took the engine and called Roo's Only to see if they would do the swap and they referred me to S Wing's. The guy at S Wings is an interesting fellow. After a year or so of talking with him I decided to rebuild the original engine and go from there. I took the car to Colorado Component Rebuilder last June. It was one of the last engines they did before closing their doors. In fact they closed the doors while they still had my car. After CCR did the rebuild I took it to the family mechanic. He did the rear end, fixed the linkage, some electrical, new gas pedal, new gas cap, brakes, and quite a few other odds and ends. He could not get the carb tuned right so we decided to go with a Webber. The Webber went in, tuned it up, and it passed emissions and I got the 5 year collector plates. So after all of this I finally drove the Brat back to my place in Gig Harbor WA. I left Colorado the day before yesterday and I got home last night. Along the way I discovered that I am losing quite a bit of oil from the transmission and the carburetor started acting up. I was stopping about every 100 miles and checking fluids. It seemed that I was losing the most fluid after hill climbs or long stretches of highway speeds. City driving and slower (55-65) highway speeds seemed to have lost little to no oil. I believe this to be the input shaft seal. I planned on re jetting the carb after moving it to sea level but what is happening now is the throttle is sticking. I believe it to be the electronic choke sticking on. Once i reach a high enough RPM it backs down, so if it starts running away pressing the clutch lets it rev and then drop. Well that is the story of my Brat. I have been lurking on this site for a few years now and I have done quite a bit of research on the 78 Brat. I know that there is not much you can do to "supe" up the car/engine and I love the original look and feel of the car. My plan is to do a complete restore to stock. Stock parts that is. I want to change the paint and interior colors. I am also planning on modernizing the car as much as I can to make it as comfortable of a ride as possible, Suspension, electrical, brakes. I have all of the original parts that came with the car and I will be keeping anything that gets changed (carb for example). I will be sharing pictures as I progress but I plan on getting the work done as soon as possible as this will be my daily driver around Tacoma/Seattle. If anyone can offer some advice to the issues that I am having as well as a good shop to get in touch with that could do some of the work for me. Thanks guys!
-
I have a weberized 85 Brat with the 3 speed auto transmission. After a couple months I finally got it running. It idles kinda rough and i have to keep the timing fully retarded (literally) or it will stall out, but it does idle. I believe that there are no vacuum leaks so it shouldn't be that. My main problem is that it idles at about 1K and revs fine, but as soon as its put in gear the RPMs drop to about 500 and it splutters and shakes. If i give it any gas at all while its in drive or reverse it dies, no matter what i do. It seems as soon as a load is being put on the tranny/engine it dies. Does anybody know what would be causing this?
-
I have an 85 Brat with a Weber Carb that won't start. I have replaced: Distributor cap Distributor rotor Fuel Pump Both Fuel Filters Spark plugs Spark plug wires The closest it ever got to starting was when I put carb cleaner in it. So maybe even though it has all new fuel parts it still isn't going to the carb? Any advice would be helpful.
-
Post up yours, let see those SUBARU keychains.
-
I have an 85 Brat that I just put a new weber carb on. Problem is when I got the carb mounted up and started it the car immediately went to 5K RPMs and sat there. I checked the throttle wheel and it was ok. I even started the car with the throttle wheel assembly completely unattached from the carb, but it still idles at 5K RPMs. I know I must be missing something. My guess is a vacuum hose. So far all I have hooked up to the new carb is the fuel line and the vacuum hose to the distributor. My questions are what else do I need hooked up to the carb? And if I do need something else where is it and where do I plug it up. I'm new at this so any pictures, diagrams or whatever would be much appreciated. I can add some pictures tomorrow of the car tomorrow afternoon if anybody thinks it'll help. Thanks!
-
I have a 1985 Subaru Brat that has the 2 dash speakers and speakers in both doors. My problem is that both speakers on the driver side don't work. The passenger side is perfectly fine, and it looks like one of the previous owners was messing with all the wiring. That is why I think that they might not be plugged up right. Do any of you all know where the wires for the driver speakers are? I don't want to take the entire dash and door out if I don't have to. I can post pictures of the wiring to if needed. Any help is appreciated ????
-
Soooo, I bought an 85 Brat earlier this month that had been sitting for a couple years and has a bunch of wasps nests. I'm close to getting it running, but I don't want to have those wasps in there. They are in hard to reach places that. I have been using PB Blaster to kill them. Anybody have any suggestions for getting rid of these SOBs?
-
Soooo, I bought an 85 Brat earlier this month that had been sitting for a couple years and has a bunch of wasps nests. I'm close to getting it running, but I don't want to have those wasps in there. They are in hard to reach places that. I have been using PB Blaster to kill them. Anybody have any suggestions for getting rid of these SOBs?
-
I just recently bought an 85 Subaru Brat for 500$, that supposedly only needs a new carburetor. Like most people on here I'm doing a Weber 32/36 swap for it. I don't need to pass an emissions test so I want to get rid of as much unnecessary stuff as I can (EGR, vacuum hoses etc). My question is what hoses can I either cap off or just pull completely? I have pictures of my engine bay, with the Hitachi gone. I would appreciate it if someone could label them. Pics: https://ibb.co/hnqbjk https://ibb.co/kEKfAQ https://ibb.co/fOVbjk https://ibb.co/mSv94k https://ibb.co/nkRGjk
-
Guys I have 2004 WRX sti rally suspension will it fit my 1998 subaru GC8 ?? -
Hey all, I have an 86 subaru gl that needs new front wheel hubs and bearings but am having a hard time sourcing them (the hubs, the bearings seem easier to locate). I live on Whidbey Island and am hoping you all might have some ideas of who I can talk to/where I can find some 4x4 hubs that will work in the seattle area/reasonably close. Thanks for your help! -
Hello to all members. Hoping this website will aleve some nervousness about my Subaru. Love this car!!!!
-
So about 8 months ago i crashed and totaled my previous car. after searching through Craigslist i stumbled upon my Subaru GL. She runs great i have some minor work that i need to do. the front windshield is cracked and iv noticed lots of older subarus have the same kind of crack that goes horizontal across the windshield. Anyway just because i decided to type in the car into craigslist and a couple other sites to check its value and see people listing and the worth to be somewhere between 2000-3000. And that is for worn down/ used. Maybe i am naive but to me thats ridiculously high. i have talked to a couple guys at shucks and they said its good because your able to do lots of swaps for the engine ect. I would just like some more info. I paid 500$ dollars for the thing and i do love it. (very reliable, Good gas mileage but i am still surprised. Will anyone please enlighten me on the subject?
